Lambretta series 1-2 license plate base plate 180mm wide, 200mm high made of 1.5mm stainless steel sheet.
Included is the base plate and the screws required for assembly.
This eliminates bent and broken license plates, and it also looks clean - the screws included are also made of stainless steel.
All you have to do is drill four 5mm holes in the four corners of the license plate (use the base plate as a drilling template). For a clean look, there are four M5 cap nuts included, push the screws through from the back and screw on with washers and cap nuts from the visible side.
The set is intended for the hole spacing on the Lambretta Series 1-2 frame, otherwise you can quickly drill the required holes yourself.