Voltage regulator 4-Pin BGM PRO 6V AC / DC universal

Voltage regulator 4-Pin BGM PRO 6V AC / DC universal

SKU: TD2719
Category: Electrics
Manufacturers:

29,50 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays ((%s - int. shipments may differ))

Description
Reviews

Compact voltage regulator for all alternators with 6 volt on-board voltage. The power supply for older vehicles with 6 volts is often designed as a so-called self-regulating system. Only the resistance of the bulbs prevents an overvoltage and thus the bulbs from burning out. Unfortunately, such simple electrical systems always carry the risk that if one bulb is defective, all the others will also fail. In addition, the light output is anything but optimal and can usually even be described as very weak at low speeds. The BGM Pro 6Volt controller offers the perfect solution here! With its help, the original electrical system can be wonderfully updated and greatly improved. The only tip I would like to mention here is to use LED technology in the taillight and turn signal area in order to obtain valuable electricity for the driving lights! Furthermore, all available light coils of the original alternator can be connected in series using the controller to maximize the light output. The controller supplies alternating current and optionally direct current. This means that it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board electrical system. AC - AC alternating current: input and output for the unregulated alternating current of the ignition base plate and the regulated current for the wiring harness. SENSE: The AC input and output must be bridged. The output voltage is compared with a reference via the sense line (bridge). This means that the voltage remains constant even when the load fluctuates. DC direct current: Output with direct current for charging the battery. If the ignition system is sufficiently powerful, consumers can also be connected directly. For example: Satnav systems, water pumps, tachometers, speedometers and all other toys imaginable. Earth - Ground: Ground connection to the frame, can easily be taken over from the old controller. Otherwise, connect the output ground to the frame and ideally to the controller housing. Connecting to the existing wiring harness is extremely easy. With complete AC systems, the regulated AC current simply has to be connected to the lines for the electrical consumers. For systems that are operated with AC and DC, only a distinction must be made between AC and DC and wired accordingly. A few connection examples are provided under the documents on the right. Also available for vehicles with 12 volt on-board voltage!

There are no reviews in the current language.